Atmel Software Framework

 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Macros Groups Pages
Here is a list of all modules:
[detail level 123456]
oApplications and Examples
oUnit Tests
oUSB application configuration
oUSB host specific requests
oDISPLAY - LCD Display - ET024006DHUThe ET024006DHU is a RGB LCD display from EDT and it offers a resolution of 240x320 pixels
oConnection ManagerThese functions are used to configure and control the WiFi connetion manager
oUSB device specific requests
oTOUCH - QT60168 16-key QMatrix touch sensorThis driver offers configuration as well as checking the status of the touch sensor
oSPI - Serial Peripheral InterfaceSee Quick start guide for SPI driver on AVR32 devices
oUSB stream statusDefines the various possible status returned by the USB Stream Control functions
oUSB device descriptors for a single interfaceThe following structures provide the USB device descriptors required for USB Device with a single interface PHDC
oExternal oscillator frequency detectionA software service to estimate an oscillator frequency using a known oscillator (external or internal) as a reference
oMain Files
oGetting Started
oSupported Device List
oWAV Decoder
oGraphical display systemThis service provides an interface to drawing graphics on a graphical display
oDISPLAY - LCD Display - DIP204B-4ORT01Driver for Ortek DIP204B-4ORT01 LCD module (4*20 characters)
oMEMORY - FLASHC - Flash ControllerFLASHC interfaces a flash block with the 32-bit internal HSB bus
oMACB - Ethernet MACThe MACB module implements a 10/100 Ethernet MAC compatible with the IEEE 802.3 standard
oAT25DFx SerialFlash component driver.See Quickstart guide for AT25DFx component.
oUSB host task module
oUSB host enumeration functions module
oMemory Control AccessCommon abstraction layer for memory interfaces
oGeneric board supportThe generic board support module includes board-specific definitions and function prototypes, such as the board initialization function
oUC3 Peripheral DMA ControllerThe Peripheral DMA controller (PDCA) transfers data between on-chip peripheral modules such as USART, SPI, SSC and on- and off-chip memories
oIn System Programming API
oAtmel part identification macrosThis collection of macros identify which series and families that the various Atmel parts belong to
oMEMS Sensors - Accelerometer LIS3L06ALSoftware Driver for the Accelerometer LIS3L06AL
oTC - Timer/CounterDriver for the TC (Timer/Counter)
oClock Management
oINTC Software Driver API for AVR UC3This is a software module to register interrupt handlers at any specified interrupt level to any interrupt line managed by the INTC module in AVR UC3 devices
oUSB task entry point module
oTOUCH - QT1081 QTouch sensorThe QT1081 sensor is operated by GPIOs and this driver provides a wrapper for the GPIO accesses
oLodePNG PNG DecoderLodePNG is a PNG image decoder
oPower Manager (PM)This is a stub on the AVR UC3 Power Manager(PM) for the sleepmgr service
oCPU - PM - Power ManagerThe Power Manager (PM) controls the oscillators and PLLs, and generates the clocks and resets in the device
oMEMORY - EBI Static Memory ControllerEBI (External Bus Interface) SMC (Static Memory Controller) allows to connect a Static Memory to the microcontroller
oUSART Debug stringsThis driver adds functionality to print debug strings and data through a dedicated USART
oCPU - Cycle CounterCPU Cycle Counter provides an interface to the COUNT and COMPARE registers
oPolarSSL - Small Cryptographic and SSL/TLS LibraryPolarSSL is a light-weight open source cryptographic and SSL/TLS library written in C
oCPU reset causeSee Quick start guide for reset cause service
oRTC - Real Time CounterDriver for the RTC (32-bit Real Time Counter)
oSIO2NCP - UARTThis module performs serial input/output functionalities via UART from and to the HOST
oNVM serviceSee Quick Start quide for common NVM driver
oImplementation of SD/MMC/SDIO Stack
oSD/MMC/SDIO common stackSD/MMC/SDIO basic APIs used by SD/MMC/SDIO memory APIs (sd_mmc_stack_mem_group)
oMEMORY - EBI SDRAM ControllerEBI (External Bus Interface) SDRAM Controller allows to connect a SDRAM to the microcontroller
oAUDIO - TLV320AIC23B Audio CodecSoftware Driver for the TLV320AIC23B Audio Codec
oSensors Xplained Extension BoardsThis file contains definitions and services related to the features of the SENSORS_XPLAINED_XXX Xplained boards
oDebug macros and functionsDebug macros and functions for tracing memory usage for the malloc() and free() functions
oILI9341 Display Controller Component DriverSee Quick Start Guide for the ILI9341 Display Controller Component Driver
oUSB device descriptors for a single interfaceThe following structures provide the USB device descriptors required for USB Device with a single interface CDC
oMEMORY - SDRAM MT48LC16M16A2TG7EThis a configuration for the MT48LC16M16A2TG7E SDRAM from Mircon
oWDT - Watchdog TimerDriver for the Watchdog Timer
oMEMORY - EIC - External Interrupt ControllerEIC allows pins to be configured as external interrupts
oBusy-Wait Delay RoutinesThis module provides simple loop-based delay routines for those applications requiring a brief wait during execution
oSensors Platform Board ConfigurationConfiguration constants defined for the platform are used to enable peripherals and map I/O pin interfaces between sensors and the development board they are paired with
oSensor Device StackThe sensor device service provides high-level interfaces and binary driver libraries for sensor devices on systems built around Atmel microcontrollers
oAUDIO - MS3 Audio CodecAudio Codec Software Driver for the MobileSound 3 (MS3) from Bang & Olufsen ICEPower configured to be used with the external CS2200 clock synthesizer
oQTouch Library for AVR & AVR32 devicesThis is the QTouch Library for AVR and AVR32 devices that consists of one api header file(touch_api.h) and respective pre-compiled libraries
oFirst-In-First-Out Buffer (FIFO)See Quick start guide for First-In-First-Out Buffer (FIFO)
oMEMORY - MPU - Memory Protection UnitMPU driver that allows the user to divide the memory space into different protection regions
oEthernet PhyThis is the common API for Ethernet Phy on AVRs
oUSB StackThis stack includes the USB Device Stack, USB Host Stack and common definitions
oTOUCH - AT42QT1060 QTouch 6-channel sensorThis driver offers configuration as well as checking the status of the touch sensor
omaXTouch low-level componentSee Quick start guide for the maXTouch component
oAT45dbx DataFlash component driver.This is a driver for the AT45dbX series DataFlash memories
oTwo Wire-interface(TWI)This is the common API for TWIs
oAUDIO - TPA6130A2 Audio AmplifierSoftware Driver for the TPA6130A2 Audio Amplifier
oSIO2HOST - USBThis module performs serial input/output functionalities via USB
oCommon IOPORT APISee Quick start guide for the common IOPORT service
oTOUCH - Resistive TouchThis driver offers resistive touch measurements by using the on-chip ADC
oDescriptors for a USB DeviceComposite
oCalendar serviceSee Quick start guide for Calendar service
oTWI - Two-Wire InterfaceDriver for the TWI (Two-Wire Interface)
oGPIO - General-Purpose Input/OutputGPIO gives access to the MCU pins
oSSC - Synchronous Serial Controller (I2S)Driver for the I2S protocol using the SSC (Synchronous Serial Controller)
oMemory Bag AllocatorThe Membag allocator is a optimized, fragmentationless general purpose memory allocator utility module designed to replace the standard C library malloc() and free() functions in resource constrained environments
oCompiler abstraction layer and code utilitiesCompiler abstraction layer and code utilities for 32-bit AVR
oVirtual Memory in RAMThe component manages a disk on a volatile memory (internal RAM)
oSIO2HOST - UARTThis module performs serial input/output functionalities via UART
oUSB device task module
oUSB device standard requests decoding module
oSerial Peripheral Interface (SPI)This is the common API for SPI interface
oUSB device descriptors for a single interfaceThe following structures provide the USB device descriptors required for USB Device with a single interface MSC
oGlobal interrupt managementThis is a driver for global enabling and disabling of interrupts
oQTouch device driver for I2C interfaceSee Quick start guide for QTouch component
oADC - Analog to Digital ConverterAnalog to Digital Converter is able to capture analog signals and transform them into digital format with 10-bit resolution
oUSBB low-level driver moduleUSBB low-level driver module
oSleep managerThe sleep manager is a service for ensuring that the device is not put to sleep in deeper sleep modes than the system (e.g., peripheral drivers, services or the application) allows at any given time
oDSP Library
oTest Suite FrameworkThis module is the test suite framework, which provides a set of standard functions and macros for defining and running test suites
oAUDIO - ABDAC - Audio Bitstream DACAudio Bitstream DAC (Digital to Analog Converter) provides functions to convert a 16-bit sample value to a digital bitstream
oStandard I/O (stdio)Common standard I/O driver that implements the stdio read and write functions on AVR and SAM devices
oSerial Interface (Serial)See Quick start guide for Serial Interface service
oUSART - Univ. Sync/Async Serial Rec/TransDriver for the USART (Universal Synchronous Asynchronous Receiver Transmitter)
oPWM - Pulse Width ModulationPulse Width Modulation (PWM) Software Driver for modules below revision v4.0.0
oMEMORY - SD/MMC card access using SPIDriver for SD (Secure Digital) / MMC (MultiMedia Card) access using SPI (Serial Peripheral Interface)
oJoystick interface (5-way)A 5-way joystick (left, right, up, down, press) interface using 5 GPIOs
oAT45DBX DataFlash (from ASF ver. 1)Driver for the AT45dbX series SPI DataFlash memories (from ASF V1)
oFAT file systemFAT file system driver that provides an interface for accessing a FAT file system located on a memory device
oUSART in SPI (Serial Peripheral Interface) modeThis is the common API for USART in SPI mode
oUSB device descriptors for a single interfaceThe following structures provide the USB device descriptors required for USB Device with a single interface DFU Atmel Class
oIJG JPEG DecoderThe IJG (the Independent JPEG Group) JPEG decoder offers, besides JPEG decoding, basic scaling (factors n*2) and an option to implement different memory management backends
oDLMALLOC - Dynamic memory allocationDlmalloc is a version of malloc/free/realloc, which offers memory administration functionallity
oAUDIO - Mono Audio PWM DACMono Audio DAC implemented with a PWM hardware module
oSupervisor specific definitions.The Sentinel task stack size
oUSB device descriptors for a single interfaceThe following structures provide the USB device descriptors required for USB Device with a single interface Vendor Class
oAtmel FLIP Protocol definitionsTo perform firmware upgrade, Atmel has developed an application called “FLIP”
\Definitions for Atmel FLIP Protocol version 2Note: Used by uc3 and Xmega parts