Atmel Software Framework

 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
Data Structures
Here are the data structures with brief descriptions:
[detail level 123]
oC_slave_device_tThe slave device instance
oCA_BLOCK_LINK
oCadc_configADC Enhanced configuration structure
oCadv_elementAdvertisement data element
oCadv_element_container
oCancs_prf
oCapp_anp_data
oCapp_csc_data
oCat25_cmdSerialFlash transfers request prepared by the AT25 driver
oCat_ble_addr_tBlue-tooth Low Energy address Type
oCat_ble_adv_report_tAdvertising report status
oCat_ble_att_cfg_t
oCat_ble_att_info_req_t
oCat_ble_bus_info_t
oCat_ble_channel_map_tChannel Map Structure
oCat_ble_char_listEncapsulation for a characteristic and its length
oCat_ble_char_presentation_tCharacteristic presentation format
oCat_ble_char_val_t
oCat_ble_characteristic_changed_t
oCat_ble_characteristic_configuration_changed_t
oCat_ble_characteristic_found_t
oCat_ble_characteristic_read_req_t
oCat_ble_characteristic_read_response_t
oCat_ble_characteristic_tCharacteristic structure
oCat_ble_characteristic_write_request_tStructure received when write to a characteristic is required
oCat_ble_characteristic_write_response_t
oCat_ble_chr_t
oCat_ble_cmd_complete_event_t
oCat_ble_conn_param_update_done_t
oCat_ble_conn_param_update_request_t
oCat_ble_connected_tAT_BLE_CONNECTED message format
oCat_ble_connection_params_tConnection parameters
oCat_ble_CSRK_tConnection Signature Resolution Key
oCat_ble_descriptor_found_t
oCat_ble_dev_config_tDevice configuration
oCat_ble_dev_infoPeer device request to modify local device info such as name or appearance
oCat_ble_disconnected_tHandle and Status of disconnected peer
oCat_ble_dtm_tData type of DMT status and report, "number_of_packets" will be used only in case of receiving the event AT_BLE_LE_PACKET_REPORT after calling the API
oCat_ble_encryption_request_t
oCat_ble_encryption_status_changed_t
oCat_ble_gap_dev_name_tDevice name
oCat_ble_gap_deviceinfo_tDevice info DB at_ble_set_gap_deviceinfo
oCat_ble_gap_irk_tIdentity Resolving Key
oCat_ble_gap_whitelist_tWhite-list structure
oCat_ble_gapc_cmp_evt_t
oCat_ble_gapc_dev_info_val_tRetrieve information Structure
oCat_ble_gapc_get_info_cmd_tRetrieve information command Structure
oCat_ble_generic_att_desc_t
oCat_ble_htpt_cfg_indntf_ind_tParameters of the AT_BLE_HTPT_CFG_INDNTF_IND message
oCat_ble_htpt_create_db_cfm_tParameters of the AT_BLE_HTPT_CREATE_DB_CFM message
oCat_ble_htpt_db_cfgParameters of the Health thermometer service database
oCat_ble_htpt_disable_ind_tParameters of the AT_BLE_HTPT_DISABLE_IND message
oCat_ble_htpt_enable_rsp_tParameters of the AT_BLE_HTPT_ENABLE_RSP message
oCat_ble_htpt_meas_intv_chg_ind_tParameters of the AT_BLE_HTPT_MEAS_INTV_CHG_IND message
oCat_ble_htpt_meas_intv_chg_req_tParameters of the AT_BLE_HTPT_MEAS_INTV_CHG_REQ message
oCat_ble_htpt_meas_intv_upd_rsp_tParameters of the AT_BLE_HTPT_MEAS_INTV_UPD_RSP message
oCat_ble_htpt_temp_send_cfm_tParameters of the AT_BLE_HTPT_TEMP_SEND_CFM message
oCat_ble_inc_srv_t
oCat_ble_included_service_found_t
oCat_ble_included_service_tService Definition
oCat_ble_indication_confirmed_t
oCat_ble_indication_recieved_t
oCat_ble_init_config_t
oCat_ble_IRK_tIRKey
oCat_ble_lecb_add_credit_ind_tParameters of the AT_BLE_LECB_ADD_CREDIT_IND message
oCat_ble_lecb_conn_req_tParameters of the AT_BLE_LECB_CONN_REQ message
oCat_ble_lecb_connected_tParameters of the AT_BLE_LECB_CONNECTED message
oCat_ble_lecb_data_recv_tParameters of the AT_BLE_LECB_DATA_RECIEVED message
oCat_ble_lecb_disconnected_tParameters of the AT_BLE_LECB_DISCONNECTED message
oCat_ble_lecb_send_rsp_tParameters of the AT_BLE_LECB_SEND_RESP message
oCat_ble_LTK_tLong Term Key
oCat_ble_mempool_t
oCat_ble_mtu_changed_ind_tMTU changed value
oCat_ble_notification_recieved_t
oCat_ble_pair_done_tPairing done message
oCat_ble_pair_features_tPairing Features
oCat_ble_pair_key_request_t
oCat_ble_pair_request_t
oCat_ble_peer_att_info_ind_tPeer attribute info structure GAPC_GET_DEV_INFO_REQ_IND
oCat_ble_prf_date_time_tTime profile information
oCat_ble_prf_server_error_ind_tMessage structure used to inform APP that an error has occurred in the profile server role task
oCat_ble_primary_service_found_t
oCat_ble_read_authorize_request_t
oCat_ble_resolv_rand_addr_status_t
oCat_ble_rx_power_value_t
oCat_ble_scan_info_tScan Information
oCat_ble_scan_report_tScan report status
oCat_ble_server_config_desc_t
oCat_ble_service_t
oCat_ble_sign_counter_tSignature counter
oCat_ble_signature_info_tConnection Signature information
oCat_ble_slave_sec_request_t
oCat_ble_spcp_tSlave preferred connection parameters
oCat_ble_user_desc_t
oCat_ble_uuid_tUUID type
oCbat_gatt_service_handler
oCble_connected_dev_info
oCBLOCKING_QUEUE_PARAMETERS
oCchar_info
oCchipid_dataDefinition for chip id register data struct
oCchipidtypeChip ID catalog information: Type ID and its description stream
oCclient_hdr
oCcmcc_configCMCC Configuration structure
oCconnect_ap_params
oCconnect_params
oCcorCoRoutineControlBlock
oCCOUNT_SEM_STRUCT
oCcrccu_dscr_typeCRCCU descriptor type
oCcsc_report_ntfSPOG report notification or indication, notify to user
oCcsc_servCustom serial chat service info
oCdesc_info
oCdevice_info_char_value_tCharacteristic value information
oCDIR
oCdis_gatt_service_handler
oCdis_info_dataConfigurable Client characteristic data for a given dis info type
oCEcDomainParam
oCEcPoint
oCed_info_t
oCFATFS
oCfifo_descFIFO descriptor used by FIFO driver
oCFIL
oCFILINFO
oCfontFont structure
oCfreertos_dma_tx_control
oCfreertos_pdc_rx_control
oCfreertos_peripheral_optionsDefine the behaviour of FreeRTOS ASF read and write functions for a peripheral
oCfreertos_peripheral_parameters
oCgatt_anp_handler
oCgatt_cts_handler
oCgatt_dst_handler
oCgatt_ias_char_handler
oCgatt_lls_char_handler
oCgatt_rtu_handler
oCgatt_service_handlerGATT services handles
oCgatt_txps_char_handler
oCgenclk_configHardware representation of a set of generic clock parameters
oCHeapRegion
oChid_boot_ntfHID boot notification or indication, notify to user
oChid_control_mode_ntfHID control point info, notify to user when control point change by user
oChid_gatt_serv_handler
oChid_infoHID info of device
oChid_prf_info_tHID profile application info
oChid_proto_mode_ntfHID protocol mode info, notify to user when protocol mode change by user
oChid_report_mapHID Report Map Information
oChid_report_ntfHID report notification or indication, notify to user
oChid_report_refHID Report Reference Descriptor
oChid_reportref_descHID report reference descriptor instance for device role
oChid_servHID service instance for device role
oChif_msg_t
oChr_gatt_service_handlerHr_gatt_service_handler is the service handler function
oChtp_app
oChx8347a_opt_tInput parameters when initializing HX8347A driver
oCi2s_configConfiguration setting structure
oCi2s_dev_inst
oCicmp6_echo_hdrThis is the ICMP6 header adapted for echo req/resp
oCicmp6_hdrThis is the standard ICMP6 header
oCicmp_echo_hdrThis is the standard ICMP header only that the u32_t data is split to two u16_t like ICMP echo needs it
oCili9325_fontFont structure
oCili9325_opt_tInput parameters when initializing ili9325 driver
oCili93xx_fontFont structure
oCili93xx_opt_tInput parameters when initializing ili9325 driver
oCin_addrFor compatibility with BSD code
oCinit_params
oCip_addr
oCip_addr2
oCip_addr_packed
oCip_globals
oCip_hdr
oCip_pcb
oCiperf_state
oCiperf_stats
oClabel_t
oCm2m_configMEM2MEM (M2M) configuration structure
oCm2m_moduleMEM2MEM (M2M) software driver instance structure
oCmedia_driverMedia driver struct
oCmemThe heap is made up as a list of structs of this type
oCmem2mem_transferMEM2MEM transfer descriptor
oCmembagInternal structure used by membag to keep track of memory, with maximum 32 blocks per membag
oCmemp
oCnetifGeneric data structure used for all lwIP network interfaces
oCOhciOHCI hardware registers
oCohci_ed
oCohci_hcca
oCohci_td_general
oCohci_td_iso
oCparams_dispatch
oCpas_service_handler
oCpbuf
oCpdc_packetPDC data packet for transfer
oCpdm_configPDM configuration structure
oCpdm_instancePDM software driver instance structure
oCplatform_api_list_tag
oCpll_configHardware-specific representation of PLL configuration
oCpnp_id_char_value_tPnp characteristic value information
oCprf_date_timeTime profile information
oCprf_server_error_indMessage structure used to inform APP that an error has occurred in the profile server role task
oCptru8_params
oCqt_setup_blockDefinitions for AT42QT2160 setup block
oCqt_statusStructure for QT2160 device-status, include:
oCQueueDefinition
oCregions_infoBoot informations (for regions)
oCs_msg_wifi_productMessage format definitions
oCs_msg_wifi_product_main
oCsam_uart_optOption list for UART peripheral initialization
oCsam_usart_opt_tMicro definition for LIN mode of SAMV71
oCsbc_caching_mode_pageSBC-2 Caching mode page
oCsbc_rdwr_error_recovery_mode_pageSBC-2 Read-Write Error Recovery mode page
oCsbc_read_capacity10_dataSBC-2 READ CAPACITY (10) parameter data
oCsbc_slba_block_descSBC-2 Short LBA mode parameter block descriptor
oCscan_resp_element
oCscsi_inquiry_dataSCSI Standard Inquiry data structure
oCscsi_mode_page_0_headerSCSI Page_0 Mode Page header (SPF not set)
oCscsi_mode_param_header10SCSI Mode Parameter Header used by MODE SELECT(10) and MODE SENSE(10)
oCscsi_mode_param_header6SCSI Mode Parameter Header used by MODE SELECT(6) and MODE SENSE(6)
oCscsi_request_sense_dataSCSI Standard Request sense data structure
oCsd_mmc_cardSD/MMC card information structure
oCSEMAPHORE_PARAMETERS
oCser_fifo_descFIFO descriptor used by FIFO driver
oCserv_info
oCserver_hdr
oCsha256ctxt
oCsn65hvd234_ctrl_t
oCsockaddrGeneric socket address structure
oCsockaddr_inSocket address structure for IPV4 addresses. Used to specify socket address information to which to connect to. Can be cast to sockaddr structure
oCspc_control_page_info_execptSPC-2 Informational exceptions control page See chapter 8.3.8
oCspi_devicePolled SPI device definition
oCsps_gatt_service_handler
oCstatus_block_t
oCStructCPtrStructure of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers
oCStructCVPtrStructure of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers
oCStructPtrStructure of pointers to 64-, 32-, 16- and 8-bit unsigned integers
oCStructVPtrStructure of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers
oCsys_timeo
oCsystem_id_char_value_tSystem ID characteristic value information
oCtcpip_msg
oCtest_caseA test case
oCtest_suiteA test suite
oCtime_valTime data structure
oCtskTaskControlBlock
oCtstr1xAuthCredentialsCredentials for the user to authenticate with the AAA server (WPA-Enterprise Mode IEEE802.1x)
oCtstrAcceptReply
oCtstrBindCmd
oCtstrBindReply
oCtstrBuffer
oCtstrCloseCmd
oCtstrConnectCmd
oCtstrConnectReplyConnect Reply, contains sock number and error value
oCtstrCyptoRespCrypto response
oCtstrDnsReplyDNS Reply, contains hostName and HostIP
oCtstrEccReqInfo
oCtstrEcdhReqInfo
oCtstrECDomainParamECC Curve Domain Parameters
oCtstrEcdsaSignReqInfo
oCtstrEcdsaVerifyReqInfo
oCtstrECPointElliptic Curve point representation
oCtstrEllipticCurveDefinition of an elliptic curve
oCtstrEthInitParamStructure to hold ethernet interface parameters
oCtstrGpRegs
oCtstrHashContext
oCtstrHifContext
oCtstrHifHdrStructure to hold HIF header
oCtstrI2cMasterInitParamI2C master configuration parameters
oCtstrListenCmd
oCtstrListenReply
oCtstrM2MAPAssocInfoM2M association information of the connected station in the AP mode
oCtstrM2MAPConfigAP Configuration
oCtstrM2MAssocEntryInfoM2M association information of of an assoicated entry in the AP mode
oCtstrM2mBatteryVoltageBattery Voltage
oCtstrM2mBinaryHeaderStructure holding compatibility version info for firmware binaries
oCtstrM2mClientStatePS Client State
oCtstrM2MConnInfoM2M Provisioning Information obtained from the HTTP Provisioning server
oCtstrM2MDefaultConnRespResponse error of the m2m_default_connect
oCtstrM2MDeviceNameConfigDevice name
oCtstrM2mEnableLogsEnable Firmware logs
oCtstrM2MIfIdSet Intrface ID
oCtstrM2MIPConfigStatic IP configuration
oCtstrM2MIPConfig2
oCtstrM2mIpCtrlBufStructure holding the incoming buffer's data size information, indicating the data size of the buffer and the remaining buffer's data size . The data of the buffer which holds the packet sent to the host when in the bypass mode, is placed in the tstrEthInitParam structure in the au8ethRcvBuf attribute. This following information is retreived in the host when an event M2M_WIFI_RESP_ETHERNET_RX_PACKET is received in the wi-fi callback function tpfAppWifiCb
oCtstrM2mIpRsvdPktReceived Packet Size and Data Offset
oCtstrM2mLsnIntListen interval
oCtstrM2MMulticastMacM2M add/remove multicast mac address
oCtstrM2MP2PConnectSet the device to operate in the Wi-Fi Direct (P2P) mode
oCtstrM2MProvisionInfoM2M Provisioning Information obtained from the HTTP Provisioning server
oCtstrM2MProvisionModeConfigM2M Provisioning Mode Configuration
oCtstrM2mPsTypePower Save Configuration
oCtstrM2mPwrMode
oCtstrM2mPwrStatePower Mode
oCtstrM2mReqScanResultScan Result Request
oCtstrM2mRevStructure holding firmware version parameters and build date/time
oCtstrM2MScanWi-Fi Scan Request
oCtstrM2mScanDoneWi-Fi Scan Result
oCtstrM2MScanListWi-Fi channel list regulation
oCtstrM2MScanOptionScan options and configurations
oCtstrM2MScanRegionWi-Fi channel regulation region information
oCtstrM2MservercmdPS Server Cmd
oCtstrM2mServerInitPS Server initialization
oCtstrM2mSetMacAddressSets the MAC address from application. It is only intended for testing purpose. This method is not used for production SW. Production SW reads MAC Address from EFUSE
oCtstrM2mSha256CtxtSHA256 context data
oCtstrM2mSlpReqTimeManual power save request sleep time
oCtstrM2mTxPwrLevelTx power level
oCtstrM2mWifiConnectWi-Fi Connect Request
oCtstrM2mWifiGainsParamsGain Values
oCtstrM2mWifiGetRevisionStructure holding firmware version parameters
oCtstrM2MWifiMonitorModeCtrlWi-Fi Monitor Mode Filter
oCtstrM2MWifiRxPacketInfoWi-Fi RX Frame Header
oCtstrM2mWifiscanResultWi-Fi Scan Result
oCtstrM2MWifiSecInfoAuthentication credentials to connect to a Wi-Fi network
oCtstrM2mWifiStateChangedWi-Fi Connection State
oCtstrM2MWifiTxPacketInfoWi-Fi Tx Packet Info
oCtstrM2mWifiWepParamsWEP security key parameters
oCtstrM2MWPSConnectWPS Configuration parameters
oCtstrM2MWPSInfoWPS Result
oCtstrNmBusCapabilitiesStructure holding bus capabilities information
oCtstrNmI2cDefaultStructure holding I2C default operation parameters
oCtstrNmI2cSpecialStructure holding I2C special operation parameters
oCtstrNmSpiRwStructure holding SPI R/W parameters
oCtstrNmUartDefaultStructure holding UART default operation parameters
oCtstrNotification
oCtstrOtaControlSecControl section structure is used to define the working image and the validity of the roll-back image and its offset, also both firmware versions is kept in that structure
oCtstrOtaInitHdrOTA Image Header
oCtstrOtaUpdateInfoOTA Update Information
oCtstrOtaUpdateStatusRespOTA Update Information
oCtstrPerphInitParamPeripheral module initialization parameters
oCtstrPingCmd
oCtstrPingReply
oCtstrPrngM2M Request PRNG
oCtstrRecvCmd
oCtstrRecvReply
oCtstrRSAPublicKey
oCtstrSendCmd
oCtstrSendReplySend Reply, contains socket number and number of sent bytes
oCtstrSetSocketOptCmd
oCtstrSockAddr
oCtstrSocket
oCtstrSocketAcceptMsgSocket accept status
oCtstrSocketBindMsgSocket bind status
oCtstrSocketConnectMsgSocket connect status
oCtstrSocketListenMsgSocket listen status
oCtstrSocketRecvMsgSocket recv status
oCtstrSslCertExpSettingsSSL Certificate Expiry Validation Settings
oCtstrSslSetActiveCsList
oCtstrSSLSetSockOptCmd
oCtstrSSLSocketCreateCmd
oCtstrSystemTimeUsed for time storage
oCtstrTlsCrlEntryCertificate data for inclusion in a revocation list (CRL)
oCtstrTlsCrlInfoCertificate revocation list details
oCtstrTlsSrvSecFileEntryThis struct contains a TLS certificate
oCtstrTlsSrvSecHdrThis struct contains a set of TLS certificates
oCtstrWifiInitParam
Structure, holding the Wi-fi configuration attributes such as the wi-fi callback , monitoring mode callback and ethernet parameter initialization structure.
oCtuniM2MWifiAuthWi-Fi Security Parameters for all supported security modes
oCtwi_module
oCtwi_optionsInput parameters when initializing the TWI module mode
oCtwi_packetInformation concerning the data transmission
oCtwihs_module
oCtwihs_optionsInput parameters when initializing the TWIHS module mode
oCtwihs_packetInformation concerning the data transmission
oCuart_cmd_hdr
oCuart_rs232_optionsInput parameters when initializing RS232 and similar modes
oCudc_config_speed_tConfiguration descriptor and UDI link for one USB speed
oCudc_config_tAll information about the USB Device
oCudc_desc_tStructure for USB Device Configuration Descriptor
oCudc_string_desc_tUSB device string descriptor Structure used to transfer ASCII strings to USB String descriptor structure
oCudd_ctrl_request_tGlobal variable to give and record information of the setup request management
oCudi_api_tUDI API
oCudi_cdc_comm_desc_tCommunication Class interface descriptor
oCudi_cdc_data_desc_tData Class interface descriptor
oCudi_hid_generic_desc_tInterface descriptor structure for HID generic
oCudi_hid_generic_report_desc_tReport descriptor for HID generic
oCudi_hid_kbd_desc_tInterface descriptor structure for HID keyboard
oCudi_hid_kbd_report_desc_tReport descriptor for HID keyboard
oCudi_hid_mouse_desc_tInterface descriptor structure for HID mouse
oCudi_hid_mouse_report_desc_tReport descriptor for HID mouse
oCudi_hid_multi_touch_desc_tInterface descriptor structure for HID multi-touch
oCudi_hid_multi_touch_report_desc_tReport descriptor for HID multi-touch
oCudi_msc_desc_tInterface descriptor structure for MSC
oCudi_phdc_desc_t
oCudi_phdc_fnctext_desc_t
oCudi_phdc_metadata_t
oCudi_vendor_desc_tInterface descriptor structure for vendor Class interface
oCUDP_datagram
oCuhc_device_tStructure to store device information
oCuhd_callback_setup_end_parameterStore the callback to be call at the end of setup request
oCuhd_callback_trans_end_parameterStore the callback to be call at the end of one transaction
oCuhi_api_tUHI API
oCuhi_cdc_buf_tInternal buffer information
oCuhi_cdc_dev_tUSB CDC device information
oCuhi_cdc_line_tCommunication line information
oCuhi_cdc_port_tCommunication port information
oCuhi_hid_mouse_dev_t
oCuhi_msc_dev_tUSB MSC device information
oCuhi_msc_lun_tLUN structure information
oCuint8_uint8_params
oCuint_params
oCUnion1616-bit union
oCUnion3232-bit union
oCUnion6464-bit union
oCUnionCPtrUnion of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers
oCUnionCVPtrUnion of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers
oCUnionPtrUnion of pointers to 64-, 32-, 16- and 8-bit unsigned integers
oCUnionVPtrUnion of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers
oCusart_frame
oCusart_iso7816_opt_t
oCusart_spi_devicePolled SPI device definition
oCusart_spi_opt_t
oCusb_association_desc_tStandard USB Interface Association Descriptor structure
oCusb_cdc_acm_desc_tCDC ACM Functional Descriptor
oCusb_cdc_call_mgmt_desc_tCDC Call Management Functional Descriptor
oCusb_cdc_control_signal_tControl signal structure
oCusb_cdc_hdr_desc_tCDC Header Functional Descriptor
oCusb_cdc_line_coding_tLine Coding structure
oCusb_cdc_notify_msg_t
oCusb_cdc_notify_serial_state_tHardware handshake support (cdc spec 1.1 chapter 6.3.5)
oCusb_cdc_union_desc_tCDC Union Functional Descriptor
oCusb_conf_desc_tStandard USB configuration descriptor structure
oCusb_dev_bos_desc_tUSB Device BOS descriptor structure
oCusb_dev_capa_ext_desc_tUSB Device Capabilities - USB 2.0 Extension Descriptor structure
oCusb_dev_desc_tStandard USB device descriptor structure
oCusb_dev_lpm_desc_tUSB Device LPM Descriptor structure
oCusb_dev_qual_desc_tStandard USB device qualifier descriptor structure
oCusb_ep_desc_tStandard USB endpoint descriptor structure
oCusb_hid_descriptor_tHID Descriptor
oCusb_iad_desc_tStandard USB association descriptor structure
oCusb_iface_desc_tStandard USB interface descriptor structure
oCusb_msc_cbw
oCusb_msc_csw
oCusb_phdc_classfnct_desc_tPHDC Class Function Descriptor
oCusb_phdc_fnctext_desc_tPHDC Function Extension Descriptor Note: The wDevSpecializations fields must follow this struct
oCusb_phdc_fnctext_singlespec_desc_tPHDC Function Extension Descriptor with single specification
oCusb_phdc_meta_data_1_desc_t
oCusb_phdc_meta_data_desc_tPHDC Meta-Data Descriptor Note: The optional meta-data field (0 to 253B) can follow this struct
oCusb_phdc_metadata_msg_1_t
oCusb_phdc_metadata_msg_tPHDC Meta-Data Message Note: The optional meta-data field (0 to EPx_size-21) can follow this struct
oCusb_phdc_qos_desc_tPHDC QoS Descriptor
oCusb_setup_req_tA USB Device SETUP request
oCusb_str_desc_tA standard USB string descriptor structure
oCusb_str_lgid_desc_t
oCvoid_params
oCwaveconfig_t[tc_capture_selection]
oCwifi_enable_mac_mcast_params
oCwifi_enable_monitoring_mode_params
oCwifi_get_mac_address_params
oCwifi_get_otp_mac_address_params
oCwifi_request_scan_ssid_params
oCwifi_request_sleep_params
oCwifi_send_ethernet_pkt_ifc1_params
oCwifi_send_ethernet_pkt_params
oCwifi_send_wlan_pkt_params
oCwifi_set_cust_InfoElement_params
oCwifi_set_device_name_params
oCwifi_set_lsn_int_params
oCwifi_set_mac_address_params
oCwifi_set_receive_buffer_params
oCwifi_set_scan_list_params
oCwifi_set_scan_options_params
oCwifi_set_sleep_mode_params
oCwifi_set_static_ip_params
oCwifi_set_sytem_time_params
oCwifi_start_provision_mode_params
oCwifi_wps_params
oCxCOMMAND_INPUT_LIST
oCxCOMMAND_LINE_INPUT
oCxEventGroupDefinition
oCxLIST
oCxLIST_ITEM
oCxMEMORY_REGION
oCxMINI_LIST_ITEM
oCxRTOS_HEAP
oCxTASK_PARAMETERS
oCxTASK_PARAMTERS
oCxTASK_STATUS
\CxTIME_OUT